TOYOTA |
|
 |
Front Bumper & Engine Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
Toyota had to add an Air Intake to cool the front differential because it is in permanent locks. When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Land Cruiser front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|
 |
|
|
Complete Set for Land Cruiser
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
Total weight for complete set is 84 lbs (38 kg) |
 |
Front Bumper & Engine Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
Toyota had to add an Air Intake to cool the front differential because it is in permanent locks. When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Land Cruiser front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|
|
Fuel Tank Skid Plate
Enabled you full protection of your fuel tank from road bumps. |
 |
Transfer Skid Plate
The “crooked” hole in this part is specially made in this shape to allow you change your oil with no need to take of the skid plate.
Gear & Transfer assembled together.
|
 |
Gearbox Skid Plate
Gear & Transfer assembled together. |
 |
|
|
Complete Set for Land Cruiser
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
Total weight for complete set is 84 lbs (38 kg) |
|
Front Bumper & Engine Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
Toyota had to add an Air Intake to cool the front differential because it is in permanent locks. When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Land Cruiser front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|
|
Fuel Tank Skid Plate
Enabled you full protection of your fuel tank from road bumps. |
|
Gearbox Skid Plate
Gear & Transfer assembled together. |
|
|
Installation Manual |
|
Complete Set
These heavy duty FJ Cruiser skid plates are laser cut from 5052 aluminium (corrosion free) and CNC press formed. Replaces the thin factory sheet metal with heavy duty steel from front bumper to rear of tcase. Includes air intake for power steering cooling and oil drain holes.
Complete set for FJ
• Full coverage from the radiator to the back bumper.
• Easy installation, no drilling- fixed to the original holes in the vehicle.
• Air intake included
• No unnecessary movements and screeches
• Each skid plate is made of 5052 aluminum that is 0.23in (6mm) thick.
Total weight for complete set is 84 lbs (38 kg)
|
 |
Front Bumper Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
Toyota had to add an Air Intake to cool the front differential because it is in permanent locks. When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the FJ Cruiser front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|
 |
Gear Box Skid Plate
Prevent unwanted damage to your lower body with a gear box and transfer skid protection plate. |  |
Transfer Skid Plate
The “crooked” hole in this part is specially made in this shape to allow you to change your oil with no need to take off the skid plate.
Needs to be installed with the fuel tank skid plate.
|
 |
Fuel Tank Skid Plate
Provides you full protection of your fuel tank from road hazards.
Needs to be installed with the transfer skid plate. |
 |
RAV4 - IN STOCK | |
Front Skid Plate
We didn’t want to neglect anybody so we asked our engineers to develop a skid plate for the RAV4 model.
The RAV4 front skid plate is made from 5052 aluminium (corrosion free) and is 0.23in (6mm) thick. This gives the RAV4 the best possible protection for even the harshest terrains. Rasta skid plates give RAV4 owners a peace of mind that the under body is protected from potholes, mud, snow, and other potential hazards of the road. Our skid plates give vehicles the protection they need, the perfect combination of weight savings, and excellent coverage.
We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain. It is easily installed and uses the original holes in the vehicle.
Fits model years 2006 and up.
Total weight for the front skid plate is 29 lbs (13.3 kg) |  |
| |
Complete Set
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt. |  |
Front Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Hi-Lux front differential for affective cooling.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in. |  |
Transfer & Gearbox Skid Plate
Gear & Transfer assembled together. |  |
Fuel Tank Skid Plate
Provides you full protection of your fuel tank from road hazards. |  |
Prado - SPECIAL ORDER ONLY | |
Complete Set
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt. |  |
Front Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Prado front differential for affective cooling.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in. |  |
Gearbox Skid Plate
Gear & Transfer assembled together. |  |
Transfer Skid Plate
Gear & Transfer assembled together. |  |
Fuel Tank Skid Plate
Provides you full protection of your fuel tank from road hazards. |  |
LEXUS |
LX 470 - SPECIAL ORDER ONLY |
|
Front Bumper & Engine Skid Plate LX 470
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake.
Lexus had to add an Air Intake to cool the front differential because it is in permanent locks. When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the LX 470 front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in. |
|
GX 470 - SPECIAL ORDER ONLY |
|
Complete Set for Land Cruiser
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
Total weight for complete set is 84 lbs (38 kg) |
|
Front Bumper & Engine Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
Toyota had to add an Air Intake to cool the front differential because it is in permanent locks. When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Land Cruiser front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|
|
Fuel Tank Skid Plate
Enabled you full protection of your fuel tank from road bumps. |
|
NISSAN |
| |
Complete Set
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
|  |
Front Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Pathfinder front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|  |
Gearbox & Transfer Skid Plate
The “crooked” hole in this part is specially made in this shape to allow you to change your oil with no need to take of the skid plate.
Gear & Transfer assembled together.
|
 |
Fuel Tank Skid Plate
Provides you full protection of your fuel tank from road hazards. |  |
| |
Complete Set
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
|  |
Front Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Frontier (Navara) front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|  |
Gearbox & Transfer Skid Plate
The “crooked” hole in this part is specially made in this shape to allow you to change your oil with no need to take off the skid plate.
Gear & Transfer assembled together. |
 |
Fuel Tank Skid Plate
Provides you full protection of your fuel tank from road hazards. |  |
LAND ROVER |
| |
Complete Set
Our under body skid plates give you the best protection we can offer for gear, transfer and underbelly. Fits model years 2005 and up.
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
Total weight for complete set is 55 lbs (25 kg)
|
 |
Front Skid Plate
The front skid matches your LR3's body style exactly. Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the LR3 front differential.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
We took extra care in designing the front skid plate to keep it conformed to the LR3's body outline and we provided easy access to the anchoring point for towing if needed. |
 |
Engine Skid Plate
Engine skid plate connected to front bumper and radiator plates.
|
 |
Radiator Protection Cover (2 Parts)
We made every effort to keep the round shape of the original part while providing you maxium protection. To achieve this, we used a moulded aluminum which is easy to install and looks like an original part of the LR3. |
 |
Gearbox & Transfer Skid Plate
Gear & Transfer 1 piece. |  |
| |
Front Skid Plate
The front skid matches your Defender's body style exactly. Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the LR3 front differential.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
We took extra care in designing the front skid plate to keep it conformed to the Defender's body outline and we provided easy access to the anchoring point for towing if needed. |
 |
SUBARU |
Forester - SPECIAL ORDER ONLY | |
Front Bumper Skid Plate
Protect your headers, oil pan, and other pricey add-ons with a skid plate. Rasta specializes in skid plates and currently makes them available to Subaru Forester. Made of 5052 aluminium (corrosion free) and 0.23in (6mm) thick, Rasta skid plates give Subaru owners a peace of mind that the under body is protected from potholes, mud, snow, and other potential hazards of the road. Our skid plates give vehicles the protection they need, the perfect combination of weight savings, and excellent coverage. |
 |
Front Bumper Skid Plate
Fits your Forester's front bumper perfectly.
Fits model years 2005 and up. |
 |
ISUZU |
D-Max - SPECIAL ORDER ONLY | |
Complete Set
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
|  |
Front Bumper Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake.
When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the D-max frontier differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|
 |
Gearbox Skid Plate
Gear & Transfer assembled together. |  |
Transfer Skid Plate
The “crooked” hole in this part is specially made in this shape to allow you to change your oil with no need to take off the skid plate.
Gear & Transfer assembled together. |  |
Fuel Tank Skid Plate
Provides you full protection of your fuel tank from road hazards. |  |
HUMMER |
H3 - SPECIAL ORDER ONLY | |
Gear & Transfer Skid Plates
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt. |  |
Gear & Transfer Skid Plates
The “crooked” hole in this part is specially made in this shape to allow you to change your oil with no need to take off the skid plate.
Gear & Transfer assembled together. |  |
SUZUKI |
| |
Complete Set
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
|  |
Front Skid Plate
The Grand Vitara front skid plate is made from 5052 aluminium (corrosion free) and is 0.23in (6mm) thick. This gives the vehicle the best possible protection for even the harshest terrains. Rasta skid plates give Grand Vitara owners a peace of mind that the under body is protected from potholes, mud, snow, and other potential hazards of the road. Our skid plates give vehicles the protection they need, the perfect combination of weight savings, and excellent coverage.
We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain. It is easily installed and uses the original holes in the vehicle.
|  |
Transfer & Gearbox Skid Plate
The “crooked” hole in this part is specially made in this shape to allow you to change your oil with no need to take off the skid plate.
Gear & Transfer assembled together. |  |
Fuel Tank Right Side
Provides you full protection of the right side of your fuel tank from road hazards. |  |
Fuel Tank Left Side
Provides you full protection of the left side of your fuel tank from road hazards. |  |
