TOYOTA - Land Cruiser 200
|
|
|
Trekking through the outback or the local asphalt byways, Rasta full aluminium 5052 Skid Plates provide safety and protection against unforeseen road hazards. Prevent unwanted damage to your lower radiator, front suspension, brake lines, oil pan, transfer case and differential. Easy installation stainless steel fasteners are included. All Rasta Plates feature a non-corrosive finish that is easy to maintain and requires no drilling.
Finally, safety and protection for underneath your Land Cruiser.
|
|
|  |
Complete Set for Land Cruiser
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
Total weight for complete set is 84 lbs (38 kg) |  |
Front Bumper & Engine Skid Plate
Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
Toyota had to add an Air Intake to cool the front differential because it is in permanent locks. When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the Land Cruiser front differential and it’s simulating exactly the functionality of the original one.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
|
 |
Fuel Tank Skid Plate
Enabled you full protection of your fuel tank from road bumps. |
 |
Gearbox Skid Plate
Gear & Transfer assembled together. |  |
| |
Internal Winch Mount
Rasta internal winch mount is fitted and well designed for the Toyota. It looks like an original part that came straight from the factory. (Winch not included)
- Made out of steel
- Powder coated
- Bolted on with screws (no welding necessary)
- Minimal drilling required!
Recommended winches:
- Warn XD9000 (click for specs)
- Warn 9.5XP (click for specs)
Note: All other winches with same dimensions will also fit. Winches that have an embedded control box will not fit the winch mount assembly. |
 |
|
|
|
|
|
