LAND ROVER - Discovery 3
|
|
Rocks are unforgiving: no matter how careful you are on the trail, you can always slip and put a nice dent under the bumper.
We do recommend professional installation since the construction of the LR3 requires additional steps to fitting these kits from what you might be used to.
|
|
|  |
Complete Set
Our under body skid plates give you the best protection we can offer for gear, transfer and underbelly. Fits model years 2005 and up.
· All skid plates are made from polished Aluminium 5052 (corrosion free) and are 6mm (0.23in) thick.
· Easy installation - requires no drilling, no adaptation, and fits to each specific model. The skids are installed to the original holes in the vehicle.
· Service holes are made so you do not have to remove the skid for service.
· Air-Intake is included in most of the models and is unique for “Rasta” products to provide affective cooling.
· We use low profile stainless steel screws to avoid “shaving” rocks and bumps in the terrain.
· Each skid plate model is designed to fit the vehicle for a stylish & professional look.
· The skids are installed as close as possible to the part to avoid unnecessary movements and screeches, and are easily cleaned with a hose to remove buildup of dirt.
Total weight for complete set is 55 lbs (25 kg)
|  |
Front Skid Plate
The front skid matches your LR3's body style exactly. Rasta front skid plates are the best you can find these days.
We enhanced the efficiency of the plate by adding a very important element- an Air Intake
When you install a front skid plate, the differential "suffers" because instead of an Air Intake, there are usually only some holes for cooling purposes.
Rasta has developed a special Air Intake specific for the LR3 front differential.
It’s also important to know that if you need to change the differential oil, you can do so without taking off the skid plate using the service holes we put in.
We took extra care in designing the front skid plate to keep it conformed to the LR3's body outline and we provided easy access to the anchoring point for towing if needed. |
 |
Engine Skid Plate
Engine skid plate connected to front bumper and radiator plates.
|
 |
Radiator Protection Cover (2 parts)
We made every effort to keep the round shape of the original part while providing you maxium protection. To achieve this, we used a moulded aluminum which is easy to install and looks like an original part of the LR3.
|  | Gearbox & Transfer Skid Plate
Gear & Transfer 1 piece. |  |
| |
Sill Protection Plate
Besides being very strong and providing you a perfect side protection, they look great and fit well with the LR3 outline.
Made from 5052 aluminium. Sold only as a pair.
|  | Sill Protection Plate
A closer look. |
 |
| |
Internal Winch Mount
Our amazing winch mount is fitted to the most popular winches in the market. They fit perfectly in the front bumper.
Includes complete electrical kit for easy installation. (Winch not included)
- Made out of steel
- Powder coated
- Bolted on with screws (no welding necessary)
- Minimal drilling required!
Recommended winches:
- Warn XD9000 (click for specs)
- Warn 9.5XP (click for specs)
Note: All other winches with same dimensions will also fit. Winches that have an embedded control box will not fit the winch mount assembly. |
 |
| |
Swing Away Tire Mount
The part Land Rover should have made! This aftermarket kit relocates the spare tire from under the back of the truck to out back, where it belongs. Under the back end it often hangs up on the trail, and you can`t fit larger tires into the small space. Most of the hardware hides behind the rear bumper or under the tire for a very clean appearance. The latch is the handle shown under the tire, which uses a strong bail-style clamp to prevent rattles. There is a locking pin to hold the arm at 90 degrees to prevent damage to the bodywork when open. Suitable for both 18" and 19" factory wheels. |  | Swing Away Tire Mount
We recommend professional installation since holes must be drilled in the rear bumper bar under the plastic cap, and holes must be drilled in the top section of the cap for the hinge and locking pin. |  | Swing Away Tire Mount |  |
|
|
|
|
|
